Master Bilt BSD Series Manuale Utente Scaricare il pdf

1 4/07

BSD SERIES

REFRIGERATORS AND FREEZERS

Installation, Operation and

Maintenance Instructions

INSPECTION

When the equipment is received, all items should be carefully checked against the bill of

lading to insure all crates and cartons have been received. All units should be inspected for

concealed damage by uncrating the units immediately. If any damage is found, it should be

reported to the carrier at once, and a claim should be filed with the carrier. This equipment

has been inspected and tested at the manufacturing facility and has been crated in

accordance with transportation rules and guidelines. Manufacturer is not responsible for

freight loss or damage.

INSTALLATION

GENERAL

If casters are installed, care should be taken when removing the unit from the crate base.

The unit is heavy and can present a hazard if not handled with care. Remove the unit crate

and crate base. Discard hardware used to secure the cabinet to the crate base. Ensure that

at least two persons are available to install the casters. Lay the cabinet on its back to

create access to the cabinet bottom. Attach the casters to the cabinet base suing the

factory installed screws as shown below.

Remove the ¼ x 20 x ¾ screws (4 per

caster) that are factory installed. Position the

caster and reinstall. Ensure that the locking

casters are installed on the front of the

cabinet. After installation is complete, return

the cabinet to its upright position. The

cabinet should set in the upright position for

at least one hour prior to energizing. This is

required to allow the refrigeration to settle to

its normal state. The cabinet should also be

levelled when it is placed in its permanent

location.

1 2 3 4 5 6 7 8 9

Sommario

Pagina 1 - REFRIGERATORS AND FREEZERS

1 4/07 BSD SERIES REFRIGERATORS AND FREEZERS Installation, Operation and Maintenance Instructions INSPECTION When the equipment is rece

Pagina 2 - GENERAL OPERATION

2 4/07 If the doors are out of alignment on the cabinet, the doors can be adjusted. This can be accomplished by opening the door(s) and loose

Pagina 3 - GENERAL MAINTENANCE

3 4/07 As the preset defrost time is reached, the controller automatically terminates the refrigeration process by turning off the condensing

Pagina 4

4 4/07 MAINTENANCE SERVICE AND ANALYSIS GUIDE REFRIGERATION SYSTEMS - ALL MODELS MALFUNCTION POSSIBLE CAUSE SOLUTION Compressor will not s

Pagina 5 - THE SWING OF SOLID DOORS

9/05 040625 INSTRUCTIONS FOR REVERSING THE SWING OF SOLID DOORS Complete the following steps if reversing the swing of the solid door(s) is desi

Pagina 6

Pagina 7

Pagina 8

Pagina 9

Commenti su questo manuale

Nessun commento

Master Bilt BSD Series Manuale Utente

Navigare online o scaricare Manuale Utente per no Master Bilt BSD Series. Master Bilt BSD Series User's Manual Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi no Master Bilt BSD Series